3 Phase
Industrial Solid State Relays and Thyristor Units
A range of Power Controllers to switch 3-Phase Loads. Ideally suited for normal or variable resistive loads and transformer & inductive load types.
For simple On/Off type firing with a DC logic input, choose the REVO S (RS3). If a time proportional Burst Firing with a DC linear input is required or for more complex load requirements, such as feedback, current limit etc, select REVO C (RC3).
You can view our product range by choosing the required load type below.
Product range 3 Phase Load Industrial SSR’s and Thyristor Power Controllers
CD3000S 3PH Solid State Relay
- Premium Series 1-2-3PH
- From 10A to 90A
- Max. voltage 480VAC or 600VAC
- cUL us is available as an option
- Heater Break Alarm option
- Firing mode: Zero Crossing
REVO C 3PH
- Phases: 3
- Current Range from 30 to 2100A.
- Voltage Range 480V, 600V and 690V +/-10%.
- Inputs: 4:20mA, 0:10V, SSR and Modbus as std and other types of Field Bus are listed in the Product Coding
- Firing mode: Burst Firing, Delayed Triggering and Phase Angle with or without Soft Start
- Control Mode: Voltage, Current and Power or V2 and I2 with additional Transfer to VxI
- USB: port integrated for configuration in safety mode (No Load and Auxiliary Voltage needed) Unit powered through USB
- 100 kA: Short Circuit Current Rating (SCCR) up to 600V
- Approvals CE+EMC; EAC; cUL from 30A to 500A, UL from 600A to 2100A
CD Automation
REVO PC, Reduces Power Peaks
Modbus RTU, Profibus, Profinet, Modbus TCP, Ethernet IP and other fieldbuses
REVO PC, Reduces Power Peaks
- Suitable for Resistive Loads and IR Lamps
- To be used with REVO S and REVO Sx
- Firing Modes: SC, HC and Dynamic Burst Firing
- Reduces Peak of Power and let you Save Energy
- Modbus RTU, Profibus, Profinet, Modbus TCP, Ethernet IP and other fieldbuses
- Heater Break Alarm
CD Automation
REVO S 3PH Three Phase Static Relay
Inputs: SSR Std; 0:10V, 4:20mA and Heater Break Alarm are options
REVO S 3PH, Three Phase Static Relay
- From 30 up to 800A
- Voltage Range 480V, 600V and 690V
- Load type: Resistive Loads, IR Lamps long and medium waveform
- Inputs: SSR Std; 0:10V, 4:20mA and Heater Break Alarm are options
- Firing modes: Zero Crossing; Burst Firing available with analogue input only
CD Automation
REVO RT – 3-Zone PID Temperature/Power Controller up to 90A
Compact Temperature/Power Control Unit, with an integrated Single Phase Static Relay for each loop
REVO RT – 3-Zone PID Temperature/Power Controller up to 90A
- 3 Control loops in the same unit
- Load Monitoring and Alarms
- Integrated SSR’s
- Up to 90A per channel/zone
- Integrated High-Speed Fuses (standard)
- Data always available via Fieldbus
REVEX 3PH Power Controller
- Phases: 3
- Type: Thyristor Power Controller
- Current Range: 30A – 280A
- Max Voltage: 480V, 600V
- Communication: Modbus
- Approvals: CE / UKCA / EAC
- Load: Resistive / Inductive / IRSW / MoSi2 / SiC