2 Phase
Industrial Solid State Relays and Thyristor Units
A range of power units to control 2-phase loads. Ideally suited for normal or variable resistive loads and transformer & inductive load types.
For simple on/off type firing with a DC logic input, choose the REVO S (RS2). If a time proportioned burst firing with a DC linear input is required or for more complex load requirements, such as feedback, current limit etc, select REVO C (RC2).
You can view our product range by choosing the required load type below.
Product range 2 Phase Load Industrial SSR and Thyristor Power Controllers
CD3000S 2PH Solid State Relay
- Premium Series 1-2-3PH
- From 10A to 90A
- Max. voltage 480VAC or 600VAC
- cUL us is available as an option
- Heater Break alarm option
REVO C 2PH
- Phases: 2
- Current Range from 30 to 2100A.
- Voltage Range 480V, 600V and 690V +/-10%.
- Inputs: 4:20mA, 0:10V, SSR and ModBus as std and different Field Bus listed in the Product Coding
- Load type: Resitive load, Infrared Short, Medium and Long waveform, Transformar Primary using Delayed Triggering
- Firing modes: Burst Firing, Zero Crossing.
- USB: port integrated for configuration in safety mode (No Load and Auxiliary Voltage needed) Unit Powered Through USB
- 100 kA: Short Circuit Current Rating (SCCR) up to 600V
- Approvals CE+EMC; EAC; cUL from 30A to 700A, UL from 800A to 2100A
CD Automation
REVO PC, Reduces Power Peaks
Modbus RTU, Profibus, Profinet, Modbus TCP, Ethernet IP and other fieldbus
REVO PC, Reduces Power Peaks
- Suitable for Resistive Loads and IR Lamps
- To be used with REVO S and REVO Sx
- Firing Modes: SC, HC and Dynamic Burst Firing
- Reduces Peak of Power and let you save Energy
- Modbus RTU, Profibus, Profinet, Modbus TCP, Ethernet IP and other fieldbus
- Heather Break Alarm
CD Automation
REVO S 2PH Three phases static relay
Inputs: SSR Std, Optional 0:10V, 4:20mA and Heater Break alarm
REVO S 2PH, Three phases static relay
- From 30 up to 800A
- Voltage Range 480V, 600V and 690V
- Load type: Resistive, IR Lamp long and medium waveform
- Inputs: SSR Std; 0:10V, 4:20mA and Heater Break alarm are options
- Firing mode: Zero Crossing; Burst Firing available with analogue input only
CD Automation
REVO RT – 2 or 3-zone PID Temperature/Power Controller up to 90A
Compact temperature/power control unit, which integrates a single phase static unit for each loop
REVO RT – 2 or 3-zone PID Temperature/Power Controller up to 90A
- 3 Control loops in the same unit
- Load monitoring and alarms
- Integrated SSR
- Up to 90A per channel
- Integrated high-speed fuses (standard)
- Data always available via Fieldbus
REVEX 2PH power controller
- Phases: 2
- Type: Power controller
- Current Range: 30A – 280A
- Max Voltage: 480V, 600V
- Communication: Modbus
- Approvals: CE / UKCA / EAC
- Load: Resistive / IRSW