Voordelige stofmonitor voor detectie van kapotte zakken
Snifter A1+ is een goedkope, gebruiksvriendelijke filterlekdetector. Deze filterlekdetector is een directe vervanging voor het Snifter A1 apparaat. Snifter A1+ kan worden gebruikt voor het bewaken van de uitlaat van een zakkenfilter, waardoor lekkende compartimenten snel kunnen worden geïdentificeerd. De inbedrijfstelling van het apparaat is eenvoudig met de handige automatische instelfunctie die binnen tien minuten na installatie een normale stofconcentratie identificeert.
De Snifter A1+ stofmonitor heeft twee vooraf ingestelde alarmgrenzen voor alarm- en waarschuwingssignalen om fabrieksoperators informatie te geven over lekken en verslechterde filtratieprestaties.
EX-modellen (IECEx en ATEX) zijn beschikbaar op Snifter A2-model en hoger.
Technical Details
Snifter A1+
Measurement Objects | Solid particles in a gas flow |
Particle Size | nbsp;0.3 µm or larger |
Measurement Range | From 0.1 mg/m³ |
Measurement Principle | Inductive Electrification |
Protection Category | IP65 |
Sensor Length (total/measuring) | 250 mm / 185 mm ı 9.8″ / 7.3″ |
Power Supply | 12 – 24 VDC |
Power Consumption | 3 W |
Cable Connection | 2 meter cable, 5 wires ı 6.5 ft cable, 5 wires |
Process Connection | – NPT 1/2 ” male thread- NPT 1/2 ” female thread welding socket (optional) |
Output Signals | Two output signals (100 – 280mA) depending on operation temperature |
Alarm Settings | Automatic – Alert: 5 x normal dust level – Alarm: 20 x normal dust level |
Signal Damping Time | Default at factory: 100 s |
Process Conditions
Temperature | Max 250 °C ı Max 482 °F |
Pressure | Max 200 kPa |
Gas Velocity | Min 3 m/s ı Min 9.8 ft/s |
Humidity | Max 95 % RH (non-condensing) |
Ambient Conditions
Temperature | – Starting -20 to +40°C ı -4 to 104 °F – Running -40 to +60°C ı -40 to 140 °F |
Humidity | Max 95 % RH (non-condensing) |
Materials and Weight
Probe (wetted part) | Stainless steel (AISI 316L) |
Process Connection (wetted part) | Stainless steel (AISI 316L) |
Probe Insulation (wetted part) | PEEK |
Enclosure | Aluminum |
Weight | 0.7 kg ı 1.5 lbs |
Documentation